Power supply

Supply voltage

12V DC

Power consumption

≤ 30W

Steady-state Power consumption is about 14W

Clock Input

Input Frequency

100MHz

Input Power

5 ~ 10dBm

Harmonic

＜ -30 dBc

Spurious

＜ -55 dBc

Clock output

Output Frequency

6400MHz ~ 6900MHz

Frequency step

≤ 1uHz

Output Power

-15 ~ 10dBm

Power stepping

0.1dB

Power stability

±0.2dB

Harmonic

＜ -35 dBc

Spurious

＜ -55 dBc

Sweep mode

External trigger /auto trigger

The excitation source has an internal Frequency sweep function, which can be configured through the communication port. When sweeping, the phase is continuous, the minimum dwell time is 5us, the dwell time step is 8ns, and the minimum Frequency step is 1uHz. It supports internal automatic Frequency sweep or external trigger Frequency sweep; at the start of the Frequency sweep, a synchronization pulse is output.

Sweep parameter mode

PC settings via serial port

Sweep timing

Fixed, see detailed description

Sweep Frequency bands

1 ~ 127

Sweep timing dwell minimum time

5us

Sweep timing dwell maximum time

4s

Sweep Frequency step

1uHz ~ 100MHz

Sweep Frequency switching cycle

8ns, automatically calculated based on the Frequency sweep step parameters

Phase Noise

1Hz

≤ -50 dBc/Hz

10Hz

≤ -70 dBc/Hz

100Hz

≤ -90 dBc/Hz

1kHz

≤ -105 dBc/Hz

Frequency stability

1s

＜2E-13

Allen variance, output signal divided by 5125 test

10s

＜5E-14

Environment

Operating temperature

-20 ºC ~ +50 ºC

Storage temperature

-55 ºC ~ +85 ºC

RF Interface

SMA-K

Control interface

DB9