STD-BP Series Multiplier_Chengdu Tongxiang Technology Co., Ltd

186-1177-6749

186-1177-6749
中文
Login/Register

Home > Product > Frequency Components Products

STD-BP Series Multiplier

　　The STD-BP series frequency multiplier can be used with the most advanced crystal frequency sources without degrading their phase noise.This module is specifically designed for low phase noise and high stability. It is very suitable for phase-locking a 100 MHz crystal oscillator to a 5 or 10 MHZ reference.

Product features

Input frequency 10MHz, output frequency 10MHz

Phase noise <-135dBc/Hz at 1Hz offset

Frequency Stability ≤1E-14 per second

Customizable other input and output frequencies (maximum output frequency >110GHz) available.

Specifications
Dimension
Guide
Measured Drawing

Product Features	Specification name		Indicator parameters		Remarkss
			10-100 type	100-1000 type
RF Input	Input frequency		10MHz	100MHz	Impedance 50 ohms
	Input Power		8dBc~13dBc	8dBc~13dBc
	Harmonics/Spurious		≤-30dBc/≤-70dBc	≤-30dBc/≤-70dBc
RF Output	Output frequency		100MHz (1 channel)	10MHz (1 channel)	Impedance 50 ohms
	Output Power		11dBm±2	11dBm±2
	Harmonics/Spurious		≤-30dBc/≤-60dBc	≤-30dBc/≤-60dBc
	Frequency stability	1s	≤1E-14	≤1E-14	Tested at +10dBm input
		10s	≤8E-15	≤8E-15
	Residual Phase Noise	1Hz	≤-135dBc/Hz	≤-110dBc/Hz
		10Hz	≤-145dBc/Hz	≤-120dBc/Hz
		100Hz	≤-150dBc/Hz	≤-130dBc/Hz
		1kHz	≤-160dBc/Hz	≤-140dBc/Hz
		10kHz	≤-165dBc/Hz	≤-150dBc/Hz
Supply voltage	Supply voltage		12VDC (Vcc±5%)
	Power consumption		Module:<10W
	Power interface		DB9 Female
environment	Operating temperature		-20 ºC ~ +50 ºC
	Storage temperature		-55 ºC ~ +85 ºC
Weight and Size	Weight		<1kg
	Size		129.512013mm (excluding connector)

PREV：STD-AP Series Analog Phase-Locked Module

NEXT：STD-FP Series Frequency Divider

Back to List