Integrated device for positioning, orientation, and timing
Built in full frequency, full system satellite receiver
Can support BeiDou(COMPASS) 3rd generation and military code requirements
Flexible configuration of output channels
Product Features | Specification name | Indicator parameters | Remarks |
Satellite reception | Receiving Mode | Support BDS-3 global signal, BDS-2, GPS/GLONASS, Galileo, QZSS, SBAS, IRNSS and other satellite signals | |
Built-in Frequency source | Crystal Oscillator | Taming accuracy:<5E-12 Timing accuracy: 20us | Power on for 2 hours, taming time is more than 1 day |
Rubidium clock | Taming accuracy:<1E-12 Timing accuracy: 1us | Power on for 2 hours, taming time is more than 1 day | |
RF Output | Frequency | 10MHz | 1 channel output TTL |
Channels | 2-Channel | ||
Output Power | 10dBm (±2dBm) | Port impedance 50 ohms | |
Frequency accuracy | <±1E-12 | Power on for 2 hours, tame for 24 hours | |
Short-term stability | ≤5.0E-12/1s; ≤5.0E-12/10s; ≤5.0E-12/100s | ||
1PPS output | Channels | 2-Channel | |
Synchronization accuracy | 25ns RMS | ||
Rising and falling edges | <2ns | ||
Pulse Width | 100ms | Customizable | |
Level | 0~5V | ||
Time location information output | Channels | 2-Channel | |
Level | RS422/RS232 | ||
Data Protocol | NMEA (GGA) | Customizable | |
NTR Network Timing | Timing accuracy | LAN: 0.1ms | |
Timing Protocol | SNTP, NTPv2, NTPv3, NTPv4 | ||
Monitoring and Control | Condition Monitoring | Internal crystal lock, taming lock: lock/unlock | Indicator light display |
Communication monitoring | RS232, 115200 baud rate RJ45 network port | ||
Supply voltage | Input voltage | 220VAC | |
Power consumption | ≤40W (25℃) | ||
Power supply interface | 220VAC international plug | ||
Ambient temperature | Operating temperature | -20℃~+50℃ | |
Storage temperature | -40℃~+90℃ | ||
Relative humidity | 90% without condensation | ||
Appearance | Weight | <10kg | |
Size | 2U standard chassis |