STT-TC Series Multi-Channel Time Interval Counter_Chengdu Tongxiang Technology Co., Ltd

186-1177-6749

186-1177-6749
中文
Login/Register

Home > Product > Measurement and Calibration Products

STT-TC Series Multi-Channel Time Interval Counter

　　The STT-TC series multi-channel time interval counter is used to measure the time interval (time difference) of multiple pulse signals, and the measurement results are reported in real time to the upper computer software. Users can analyze and view the time difference data of any two measured signals in real time.

Product features

Any two channels can be selected for time difference measurement and analysis

Can automatically or periodically measure and generate test reports and curves

Built in frequency source, optional access to external clock signal

Simultaneous measurement of multiple signals

Real time on-demand data storage

Specifications
Dimension
Guide
Measured Drawing

Product Features	Specification name	Indicator parameters	Remarkss
Reference input	Input frequency	10MHz/5MHz	Port impedance 50 ohms
	Input Power	7dBm~13dBm
	Harmonic	≤-30dBc
	Spurious	≤-70dBc
Measured pulse input	Input frequency	1~20Hz
	Channels	8-Channel/16-Channel
	Input amplitude	2~6V
	Input pulse width	≥20ns
Measuring indicators	Measurement uncertainty (TDEV)	＜8E-12/1s
	Measurement uncertainty (RMS)	<10ps
Monitoring Management	Physical Interface	Network port 1 RJ45 Serial port 1 RS232 Baud rate: 115200, N, 8, 1
Supply voltage	Supply voltage	Module: 12VDC (Vcc ± 5%) Chassis: 220VAC (±10%)
	Power consumption	Module: <10W Chassis: ≤50W
	Power interface	Module: DB9 serial port pin (pin 5 ground, pin 6 12v) Chassis: International power plug
Ambient temperature	Operating temperature	-20 ºC ~ +50 ºC
	Storage temperature	-55 ºC ~ +85 ºC
Weight and Size	Weight	Module: less than 3kg Chassis: less than 10kg
	Size	1/2U standard chassis

NEXT：STT-PC Series Multi-Channel Phase Comparator

Back to List