STD-FP Series Frequency Divider_Chengdu Tongxiang Technology Co., Ltd

186-1177-6749

186-1177-6749
中文
Login/Register

Home > Product > Frequency Components Products

STD-FP Series Frequency Divider

　　The STD-FP series frequency divider can down-convert high-frequency signals to produce low-frequency sine waves or square wave signals. This module is specifically designed for low phase noise and high stability. The frequency divider can be used for low-noise frequency conversion without affecting the performance of the signal, making it an ideal frequency conversion component for scientific research, precision instruments, and metrological testing.
　　The standard models of the STD-FP series frequency divider support down-conversion from 100MHz to 10MHz or 5MHz, and from 10MHz to 5MHz. The highest input frequency exceeds 110GHz, allowing for ideal down-conversion of low-noise photogenerated microwave signals.

Product features

Input 100MHz/10MHz, output 10MHz/5MHz (customizable up to 110GHz)

Spurious levels below -80dBc

Residual phase noise:

<-160dBc/Hz at 1kHz offset (10-5);

<-160dBc/Hz at 1kHz offset (100-10)

Additional frequency stability 1s ≤ 5E-14 (100-10)

Customizable other input and output frequencies available.

Specifications
Dimension
Guide
Measured Drawing

Product Features	Specification name		Indicator parameters		Remarkss
			100-10/100-5	Type 10-5
RF Input	Input frequency		100MHz	10MHz	Port impedance 50 ohms
	Input Power		3dBm~11dBm	3dBm~11dBm
	Harmonics/Spurious		≤-30dBc/≤-80dBc	≤-30dBc/≤-80dBc
RF Output	Output frequency		10MHz/5MHz	5MHz	Port impedance 50 ohms
	Output Power		≥10dBm	≥10dBm
	Harmonics/Spurious		≤-30dBc/≤-80dBc	≤-30dBc/≤-80dBc
	Frequency stability	1s	≤5E-14	≤5E-14	Tested at 8dBm input
		10s	≤8E-15	≤8E-15
	Residual Phase Noise	1Hz	≤-130dBc/Hz	≤-130dBc/Hz
		10Hz	≤-140dBc/Hz	≤-140dBc/Hz
		100Hz	≤-150dBc/Hz	≤-150dBc/Hz
		1kHz	≤-160dBc/Hz	≤-160dBc/Hz
		10kHz	≤-165dBc/Hz	≤-165dBc/Hz
Supply voltage	Supply voltage		12VDC (Vcc±5%)
	Power consumption		Module: <6W
	Power interface		DB9 Female
environment	Operating temperature		-20 ºC ~ +50 ºC
	Storage temperature		-55 ºC ~ +85 ºC
Weight and Size	Weight		<1kg
	Size		129.512013mm (excluding connector)

PREV：STD-BP Series Multiplier

Back to List