-
Product
+
-
Download
+
-
Support
+
-
About us
+
Input: 1-120MHz Output Frequency: 1-120MHz
Module/Standard Chassis
Relative Phase Jitter between Channels: <3fs@1s
Frequency Stability: ≤5E-15/s
Phase Noise: ≤-140dBc/Hz@1Hz
Chassis version supports dual input channels
Product Features | Specification name | Indicator parameters | Indicator parameters | Remarks |
RF Input | Input Frequency | 10MHz | 100MHz | Maximum clock cycle 10% |
Maximum input Power | 0~15dBm | 0~15dBm | ||
Input Path | 1 Channel (modular) | 1 Channel (modular) | ||
2-Channel (chassis type) | 2-Channel (chassis type) | |||
Isolation | Output to Output | ≥100dBc | ≥80dBc | |
Output to Input | ≥100dBc | ≥80dBc | ||
RF Output | Output Path | 4/8/16 Channel | 4/8/16 Channel | The module is 4-Channel |
Output Frequency | 10MHz | 100MHz | Same as input | |
Link Gain | 0±2dB | 0±2dB | Tested at 8dBm input, when the input Frequency exceeds 80MHz, the gain will drop by 2dB | |
Spurious | ≤-80dBc | ≤-80dBc | ||
Harmonic | ≤-40dBc | ≤-40dBc | ||
Residual Frequency stability* | 1s ≤ 5E-15; 10s ≤ 2E-15 | 1s ≤ 5E-15; 10s ≤ 2E-15 | ||
Residual Phase Noise* (dBc/Hz) | ≤-140@1Hz ≤-150@10Hz ≤-155@100Hz ≤-160@1kHz ≤-165@10kHz | ≤-120@1Hz ≤-130@10Hz ≤-140@100Hz ≤-150@1kHz ≤-160@10kHz | Tested at 10MHz, 12dBm | |
Supply voltage | Supply voltage | Module: 12VDC (Vcc ± 5%) Chassis: 220VAC (±10%) | ||
Power consumption | Module: ≤ 10.0W (4 channels) Chassis: ≤ 60.0W | |||
Power interface | Module: Serial port pins Chassis: National standard Power plug | |||
environment | Operating temperature | -20ºC ~ +50ºC | ||
Storage temperature | -40ºC ~ +85ºC | |||
Appearance | Weight | Module:<2Kg; Chassis: <10Kg | ||
Size | Module: 129.5*120*13mm (4 outputs) Chassis: 1U /2U standard chassis | |||
